data sheet no. pd10062 revg series PVG612Apbf microelectronic power ic hexfet ? power mosfet photovoltaic relay single pole, normally open, 0-60v, 2.0a ac/ 4.0 a dc general description the PVG612A series photovoltaic relay is a sin gle- pole, normally open solid-state re lay that can replace electromechani cal re lays in many applications. it util- izes international rectiiers proprietary hexfet po wer mosfet as the output switch, driven by an inte grated circuit photovoltaic gen erator of novel constructi on. the output switch is con trolled by radiation from a gaalas light emit ting diode (led) which is optically isolated from the photovol taic generator. these units exceed the performance capabilities of electromechanical relays in operating life, sensitivity, stability of on-resistance, miniaturization, insens itivity to magnetic ields and ruggedess. the compact PVG612A is particularly suited for isolated switching of hi gh currents from 12 to 48 volt ac or dc power sources. series PVG612A relays are packaged in a 6-pin, molded dip package with either thru-hole or surface mount (gull-wing) termi nals. it is avail able in standard plastic ship ping tubes or on tape-and-reel. please refer to part identiica tion in formation opposite. features ? bounce-free operation ? high load current capacity ? high off-state resistance ? linear ac/dc operation ? 4,000 v rms i/o isolation ? solid-state reliability ? ul recognized ? esd tolerance: 4000v human body model 500v machine model applications ? programmable logic controllers ? computers and peripheral devices ? audio equipment ? power supplies and power distribution ? control of displays and indicators ? industrial automation part identiication PVG612Apbf thru-hole PVG612Aspbf surface-mount PVG612As-tpbf surface-mount, tape and reel (hexfet is the registered trademark for international rectiier power mosfets) www.irf.com 1 downloaded from: http:///
series PVG612Apbf www.irf.com 2 input characteristics limits units minimum control current (see igure 1) 5.0 ma maximum control current for off-state resistance @ t a = +25c 0.4 ma control current range (caution: current limit input led, see igure 6) 5.0 - 25 ma maximum reverse voltage (1ma max.) 6.0 v output characteristics limits units operating voltage range 0 to 60 v (dc or ac peak) maximum continuous load current @ t a = +40c, 10ma control (see igure 1) a connection 2.0 a (ac or dc) b connection 2.5 a (dc) c connection 4.0 a (dc) maximum pulsed load current @ t a =+25c (100 ms @ 10% duty cycle) a connection 7.5a (ac or dc) b connection 8.5 a (dc) c connection 15.5 a (dc) typical thermal resistance (rthja, junction-to-ambient) a connection 79.1 (c/w) b connection 112.2 (c/w) c connection 81.0 (c/w) maximum on-state resistance @t a =+25c for 1a pulsed load, 10ma control (see igure 4) a connection 100 m b connection 50 m c connection 35 m maximum off-state leakage @ 60v, t a =+25c 1.0 ? maximum turn-on time @t a =+25c (see igures 7 & 8) for 500ma, 50v dc load, 10ma control, 10ms pulse width 3.5 ms maximum turn-off time @t a =+25c (see igures 7 & 8) for 500ma, 50v dc load, 10ma control, 10ms pulse width 0.5 ms typical output capacitance @ vdd=50v, f=1mhz (see igure 2) 105 pf electrical speciications (-40c t a +85c unless otherwise speciied ) general characteristics limits units minimum dielectric strength, input-output 4000 v rms minimum insulation resistance, input-output, @t a =+25c, 50%rh, 100v dc 10 12 maximum capacitance, input-output 1.0 pf maximum pin soldering temperature (10 seconds maximum) +260 ambient temperature range: operating -40 to +85 c storage -40 to +100 international rectiier does not recommend the use o f this product in aerospace, avionics, military or life support applications. users of this international rectiier product in such applications assume all risks of such use and i ndemnify international rectiier against all damages resulting from such use. downloaded from: http:///
series PVG612Apbf www.irf.com 3 connection diagrams 0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 0 10 20 30 40 50 60 "a" connection figure 1. current derating curves figure 2. typical output capacitance figure 3. typical linearity characteristics figure 4. typical normalized on-resistance max. load current (a) typical capacitance (pf) ambient temperature (c) v dd drain to drain voltage load current (a) rdds0n (mohm) voltage drop v dd temperature (c) 0 10 20 30 40 50 60 70 80 90 100 0 25 50 75 100 "a"connection "b"connection "c"connection -8 -6 -4 -2 0 2 4 6 8 -0.5 -0.4 -0.3 -0.2 -0.1 0.0 0.1 0.2 0.3 0.4 0.5 i led=10m a pulsed, 25c 0 20 40 60 80 100 5,04.0 3.0 2.0 1.0 0.0 c connection i led = 10ma b connection a connection downloaded from: http:///
series PVG612Apbf www.irf.com 4 90% 10% i i led d t dly t on t off figure 7. typical delay times figure 8. delay time deinitions -35 -15 5 25 45 65 85 10 5 100 30 10 3.0 1.0 0.3 0.1 16 20 12 84 0 0.5 1.0 1.5 2. 0 0 not exc eeded t y p i c a l caution: provide current limiting so that 25 ma maximum steady- state control current rating is m i n . d e v i c e a n d + 8 5 d e g . c l i m i t m a x . d e v i c e a n d - 4 0 d e g . c l i m i t figure 5. typical normalized off-state leakage figure 6. input characteristics (current controlled) 0.01 0.10 1.00 10.00 0 5 10 15 20 ton tdly toff i d-off / i d-off 25 o c input current (ma) ambient temperature ( o c) led forward voltage drop (volts dc) delay tims (ms) i led (ma) downloaded from: http:///
series PVG612Apbf www.irf.com 5 01-2008 01 case outlines 01-2009 01 ir world headquarters: 233 kansas st., el segundo, california 90245 tel: (310) 252-7105 this product has been designed and qualiied for the industrial market. data and speciications subject to change without notice. 2/2008 downloaded from: http:///
|
